Quality Issue Handling Procedure
How we classify, resolve and prevent quality issues
This procedure sets out how we handle quality complaints relating to LED eye-care lamps, desk lamps, grow lights and related OEM/ODM products — promptly, transparently and fairly. For sample requests and lead times, please see our Sample Policy & Order Terms.
1 · Purpose
- Respond to customer quality concerns promptly and transparently.
- Determine whether an issue is a genuine product quality defect, shipping damage, improper use, or a specification/compatibility issue.
- Provide a fair and mutually agreed resolution.
- Identify root causes and implement corrective and preventive actions to prevent recurrence.
- Maintain traceability and support continuous improvement.
2 · Scope
This procedure applies to quality issues reported by customers after delivery of standard products, OEM/ODM products, samples, trial orders and bulk orders. It covers defects or abnormalities including, but not limited to:
- Failure to power on or intermittent operation
- Flickering or unstable light output
- Uneven brightness or dark spots
- Color temperature or color consistency deviation
- Abnormal noise from the driver or housing
- Premature LED failure or lumen depreciation beyond specification
- Damaged housing, diffuser, switch or connector
- Packaging or transport damage
- Missing accessories or incorrect model/specification delivered
This procedure does not cover normal wear and tear, damage caused by misuse, unauthorized modification, or operation outside the published specifications, except where such exclusion is not permitted by applicable law.
3 · Definitions
- Quality defect
- A product condition that does not conform to the agreed specification, drawings, approved sample, or published product data.
- Shipping damage
- Damage that occurs during transportation and is identifiable from packaging and delivery records.
- Improper use
- Damage or malfunction caused by installation, operation, storage or maintenance that does not follow the product instructions or agreed conditions.
- Specification / compatibility issue
- A mismatch between the product and the customer’s intended application, installation environment, or local electrical/regulatory requirements, where the product itself conforms to the agreed specification.
- CAPA
- Corrective and preventive action — actions taken to eliminate the cause of a nonconformity and prevent recurrence.
- Batch/lot number
- The production identification code used for traceability.
4 · Responsibilities
- Customer
- Provides complete order information, a clear description of the issue, photos/videos, affected quantity and batch/lot number where available; returns samples if reasonably requested.
- After-sales team
- Single point of contact — acknowledges the complaint, collects information, coordinates assessment and communicates the resolution.
- QC / technical team
- Conducts initial assessment and root cause analysis, determines responsibility, proposes the resolution and implements CAPA.
- Production / purchasing
- Implements corrective actions related to process, incoming materials, assembly, testing or packaging.
- Management
- Reviews major or repeated quality issues and approves escalation decisions where necessary.
5 · Procedure
Responsibility classification
| Classification | Typical evidence | Responsibility |
|---|---|---|
| Genuine quality defect | Photos/videos, sample inspection, batch records, test data | We bear responsibility according to the agreed terms |
| Shipping damage | Packaging photos, carrier records, delivery receipt | Handled with the carrier and customer; resolution depends on shipping terms |
| Improper use / installation | Installation photos, operating conditions, instruction compliance | Customer responsibility; we may offer technical support or paid repair |
| Specification / compatibility issue | Product specification, application requirements, local electrical conditions | Joint review; solution depends on conformance to the agreed specification |
| Insufficient information | Missing photos, samples or order details | Further verification required before responsibility is determined |
6 · Response and resolution time frames
| Stage | Target time frame |
|---|---|
| Acknowledgment of complaint | Within 24–48 hours on business days |
| Initial assessment after complete information | Within 24–48 hours |
| Root cause analysis | 1–3 business days, depending on complexity and sample return |
| Resolution proposal | Within 3–5 business days after responsibility determination |
| Replacement / refund / credit note arrangement | According to the agreed resolution and shipping schedule |
| CAPA implementation | 1–3 business days depending on the corrective action |
These time frames are targets and may be affected by the complexity of the issue, sample shipping time, third-party testing, or circumstances beyond our reasonable control. We will communicate any delay promptly.
7 · Evidence required for quality complaints
- Order number / invoice number
- Product model and specification
- Batch/lot number
- Quantity affected and total quantity
- Photos of the product label and defect
- Videos showing the issue in operation
- Packaging photos, especially for shipping damage
- Installation environment and operating conditions
- Test data or measurement results, if available
- Delivery receipt and carrier information for shipping damage
Incomplete information may delay the assessment — we will tell you what is missing and why it is needed.
8 · Escalation
If you are not satisfied with the proposed resolution, or if the issue involves a major safety concern, a repeated quality issue, a large affected quantity, or a dispute over responsibility, the case will be escalated to management for review. We aim to provide a final response within 3–5 business days after escalation.
9 · Customer communication principles
- We acknowledge your concern respectfully.
- Our assessment is based on evidence and agreed specifications.
- We explain the reasoning behind the classification and the proposed resolution.
- We keep you informed of progress.
- We avoid commitments we cannot reasonably fulfil.
- We protect confidential customer information.
10 · Review and continuous improvement
This procedure is reviewed annually or after major quality incidents. Feedback from customers, after-sales records and CAPA effectiveness are used to improve this procedure and our product quality.
11 · Contact
For quality issues, please contact the Quality / After-Sales team — rain@zwlamp.com · WhatsApp +86 189 3822 1891 · Monday–Saturday, 9:00–18:00 GMT+8. Please include your order number, product model and photos/videos where possible so we can assist you faster.
Report an issue
Tell us what happened
Quality / After-Sales
rain@zwlamp.com
WhatsApp +86 189 3822 1891
Business hours
Monday – Saturday
9:00 – 18:00 (GMT+8)